Galvanized Steel Wire Rope Drawing Process To Pay Attention!

Drawing is galvanized steel wire rope production process will experience a part of the operation, and our staff in the process of drawing need to pay attention to what kind of problem?

When we work with our staff, keep the water flow between the inside of the drum and the mold box as much as possible. If the wire has been cooled and the water is broken, the operation of the vehicle should be stopped. Under normal circumstances, the temperature inside the mold box temperature can not exceed 50 degrees Celsius, and the tank inside the lubricating fluid is also need to maintain the state of circulation, the temperature of the lubricant can not exceed 75 degrees Celsius, each shift need to conduct a check.

When we are drawing, we should pay attention to the strict compliance with the order of operation. It is not possible to operate in a way of jumping. The diameter of the wire on the galvanized steel wire rope should also be carefully checked and can be kept within the permissible deviation. But if its diameter has exceeded the provisions of the scope of the error, it should be replaced in a timely manner, can not continue to put into the next operating line.